ARCTIC Alpine 23 Compact AMD CPU Cooler
IMPROVED COOLING PERFORMANCE WITH A NEW PRODUCTION PROCESS
The high thermal conductivity of aluminum is fully maintained by the new type of extrusion. This new production process creates a powerful but very compact radial cooler. The particularly thin cooling fins of the new Alpine model are Y-shaped. This increases the surface area of the radiator and thus the cooling capacity.
WIDE RANGE OF RPM
Alpine 23 is equipped with a new engine technology with a very wide speed range controlled by PWM. This keeps noise levels to a minimum and guarantees maximum cooling performance if necessary.
LOWER ENERGY CONSUMPTION AND MINIMUM VIBRATION
The new Alpine 23 is powered by an updated engine and runs much more efficiently than its predecessors. Thanks to sinusoidal magnetization, the new motor generates only 5% of the vibrations from the commutation of a conventional DC motor. These factors help save energy, reduce coil temperature and minimize vibration without compromising performance.
HIGH QUALITY BEARING
Thanks to the alloy/lubricant combination developed in Germany, friction in the bearing is reduced and higher efficiency is achieved. The result is less heat generation and less bearing noise, which means you can enjoy a longer life with your fan.
A 10 ° C lower motor temperature roughly doubles the life of the fan. The new ARCTIC motor has four times longer service life due to the low coil temperature
PRE-FILLED HEAT PASTE MX-2
The pre-applied high-performance MX-2 thermal compound ensures fast and clean installation.
EASY TO INSTALL AND WITHOUT TOOLS
Thanks to the mounting clamps, installation is really easy. The Alpine 23 simply connects to existing AMD retention modules and is firmly screwed on.
IMPROVED COOLING PERFORMANCE BY NEW PRODUCTION PROCESS
The high thermal conductivity of aluminum is fully retained by a new type of extrusion. This new production process creates a powerful yet very compact radial heat sink. The particularly thin cooling fins of the new Alpine are fanned out in a Y-shape. This increases the surface area of the heat sink and therefore the cooling capacity.
WIDE RPM RANGE
The Alpine 23 features a new motor technology with a very wide, PWM-controlled RPM range. This keeps the noise level at a minimum while guaranteeing maximum cooling performance when needed.
LOWER POWER CONSUMPTION & MINIMUM VIBRATION
The new Alpine 23 is powered by an updated motor and runs much more efficiently than its predecessors. Due to sinus-magnetizing the new motor creates just 5% of the vibration from commutation of a regular DC-motor. These factors contribute towards saving energy, lowering the coil temperature and reducing vibrations to a minimum without compromising performance.
HIGH QUALITY BEARING
Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.
EXTENDED LIFE SPAN
A 10 ° C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature.
AMD Socket: AM4
Ram Clearance: unlimited
Warranty: 2 Years
Outer Diameter: 93.4 mm
Fin Material: Aluminum
Number of Fins: 50 Y-shaped Fins
Thermal Paste: MX-2 pre-applied
Fan Diameter: 90 mm
Fan Speed: 100 – 2000 rpm
Fan Bearing: Fluid Dynamic Bearing
Noise Level: 0.3 Sone
Current: 0.06 A
Size & Weight
Length: 98.6 mm
Width: 121 mm
Height: 65 mm
Width: 111 mm
Height: 76 mm
Length: 111 mm
Weight: 0.338 kg