Arctic BioniX P120 Gaming Fan – Grey/White

The BioniX P120 fan features completely redesigned fan blades and is optimized for high static pressure. Thus, the BioniX P120 is especially effective when used on heatsinks and with higher air resistance. The wide RPM range from 200 to 2100 RPM can be regulated seamlessly and synchronously with other fans thanks to ARCTIC’s PWM Sharing Technology (PST).

Optimized for static pressure
During the development of the new BioniX P120, special emphasis was placed on the concentrated airflow and hence the high static pressure. The fan ensures extremely efficient cooling, even with increased air resistance. Therefore, the BioniX P120 is particularly suitable for use on coolers and radiators.

Optimized for Static Pressure
During the development of the new BioniX P120, special emphasis was placed on a focused airstream and thus a high static pressure. The fan ensures extremely efficient cooling, even with increased air resistance. Therefore, the BioniX P120 is particularly suitable for use on heatsinks and radiators.

More Efficient Technology
The engine is powered by a Neodym-Iron-Boron-Magnet ring of the new generation, which allows the new BioniX P120 to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without comprimising the performance.

Maximum Quietness, Minimum Vibration
Even at low speeds, the operating sound of the new ARCTIC engine is barely noticeable. Due to sinus-magnetizing, the new motor only generates about 5% of the vibration from the commutation of a regular DC motor without a filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new engine.

Extended Life Span
A 10 ° C lower engine temperature roughly doubles the life span of a fan. The new ARCTIC engine has a four times longer service life through its low coil temperature. Consequently, we have extended the warranty to 10 years.

High Quality Bearing
Thanks to an alloy/lubricant combination developed in Germany, the friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.

Specifications