ARCTIC Freezer i13 X-CPU Cooler
ARCTIC Freezer i13 X is a compact CPU cooler with one 92 mm fan. It uses an improved and cooler design heat pipe layout. In conjunction with a fan that is optimized for high static pressure, ARCTIC has succeeded significantly improve the cooling performance of the Freezer i13 X ‘. It comes with a pre-applied ARCTIC MX-2 thermal compound and is simple mounting system.
Small Footprint for optimal Compatibility:
The Freezer i13 X combines a compact advanced heat sink design with 3 direct touch heat pipes. In combination with the fan designed for static pressure, an optimal cooling performance is achieved despite the comparatively small dimensions. The Freezer i13 X has an installation height of only 137 mm and there are no limitations in RAM compatibility.
Pre-applied MX-2 Thermal Paste:
Pre-applied, high-performing MX-2 thermal paste guarantees quick and clean assembly.
Longer Lifespan thanks to its Low Motor Temperature:
The Freezer i13 X uses a fan motor newly developed by ARCTIC. This runs less audibly and more efficiently, so that the temperature of the coils is 20 ° C lower than with conventional motors. This increases the lifespan of the fans considerably, allowing ARCTIC to grant a 6-year warranty period for the Freezer i13 X.
Offset Heat Pipes enable Optimal Heat Dissipation:
The direct touch heat pipes attached to the Freezer i13 X and an optimized design of the 44 cooling fins together ensure that the heat from the CPU can be ideally removed and released into the air.
Fluid Dynamic Bearing:
Thanks to a combination of alloy and lubricant developed in Germany, the friction within the bearing is reduced, leading to greater efficiency. In this way, less heat is generated, there is less bearing noise and the life of the fan is extended.
Direct Touch Heat Pipes:
The Freezer i13 X uses direct touch heat pipes. This ensures that the heat to be dissipated is transferred directly to the heat pipes without an additional material layer, and transported into the heatsink via the pipes.
Heat Pipe Direct Touch Diameter 6 mm x 3
Aluminum radiator fins x 44 Thickness: 0.4 mm
MX-2 thermal mixture is pre-applied
Dimensions 85.5 (L) x 108.5 (W) x 137 (H) mm
Weight 425 g
Intel® 1200 compatibility, 115x
RAM restrictions are not limited
Fan 1 x 92 mm, 300–2000 rpm (PWM controlled)
Current/Voltage 0.07 A/12 V
Bearings FDB bearing
Noise at 0.3
Connector 4-pin connector